Pump Application Profile - Dosing Pump

Please complete the following as accurately as possible. Required fields are marked with '*'.

Company name*:
Contact name*:
Address*:
Telephone*:
E-mail address*:
Main application*:

1. Pump data
1.a Required capacity*	l/h
1.b Required counter pressure*	bar
1.c Required power supply*	V/Hz
1.d pump Type.	Diaphragm Plunger
1.e drive type	Electric Motor Pneumatic
1.f ATEX
1.g EX Zone rating
1.h IP Rating required
1.i Installation*	Wall Floor

2. Version required
2.a Control panel position*	Side-fitted Front-fitted

3. Application

Cooling tower
Boiler
Swimming pool
Primary & process water (for industrial application)
Biological wastewater & sewage treatment
Drinking water treatment
Irrigation

3.a OEM application

Car wash
Mechanical component wash
Surface plating
Other (please specify)

4. Liquid to be injected
4.a Type of liquid*
4.b Commercial name
4.c Concentration*
4.d Specific gravity
4.e Viscosity at normal liquid temperature*
4.f Viscosity at lowest liquid temperature
4.g Does it contain solid particles*	Yes No
If yes, size of particles:
4.h Does the liquid have phenomena such as:	Precipitation Gasification Crystallisation Toxidity mg/m3

5. Use and environmental conditions*
5.a Injection place	Open reservoir Pipeline
5.b Pressure in the pipeline	Min. bar Max. bar
5.c Max. temperature at the injection point	°C
5.d Max. ambient temperature	°C
5.e Suction lift	m
5.f Length of suction line	m
5.g Length of discharge line	m
5.h is connection at bottom of tank permitted?	Yes No
5.i Dosing into open tank?	Yes No

6. Application details*

Quantity to be dosed
Litres per Hour

Example: 10 ml/l of chlorine or 10 ml/l of a 5% solution, the latter meaning that 200 ml/l must be dosed to achieve the correct dosage.

7. External pump control*

Pump control
Manual
Pulse
4-20 mA
Water meter
pH
Redox (ORP)
Chlorine
Conductivity
Other (please specify)

8. Accessories Required

1. Installation kit (pos. 3 + 4 + 5)
2. Control cable and plug
3. Tubing
4. Foot valve
5. Injection valve
6. Multifunction valve
7. Flow indicator
8. Pump connection (retro fitting)
9. Rigid suction line
10. Level control unit
11. Counter-pressure and relief valve
12. Counter-pres. and isolating valve
13. Automatic vent valve
14. Pulsation dampener
... Connector
... Dummy plug
... Pressure gauge
15. Priming aid
16. Tank
... Hand mixer
... Electric agitator
17. Water meter